David Bray Amps

If you hear a clip you like but want something a little different, I am happy to work with you on it. Other additional options are available such as deep, mid, bright, gain, and high-cut switches. For these I use push/pull pots on the channel volume and tone controls. This way, the amp still retains it's stock appearance, yet is open to even more sounds. Cost is $25 per push/pull switch option.

Channel 2 Dual-Sound -	This is a push/pull option that greatly increases flexibility. Pull it out and highs and mids, as well as gain, are added to channel 2...beyond what is done in the mod work. Great for rolling off bass while still keeping the sound of both channels on ten. Also works as a high-cut for channel 1, if you pull it out while channel 2 is turned most or all of the way down - $25
Vintage/Hot Switch -	This is a push/pull pot option that also greatly increases the flexibility, giving you the option between a mellower, more vintage sound and a hotter, gainier one. Adding this and the Channel 2 Dual-Sound gives an amp with a Mod/Rework a much broader range of capabilities - $25
Harmonic Switch -	This push/pull pot option enhances gain in the upper mids and highs and makes harmonics easier to achieve. - $25
High Cut -	A great way to tame the Plexi zing while keeping the foundation intact. The pot mounts on the rear of the amp (usually) and completely bypasses when turned back. - $25
Line-out w/ Level control -	You can use this to send a line level signal to your time-based effects, then to another amp (see the Tone Tricks page). Pull the pot out for ground lift. - $40
Output Level Control -	An extremely transparent way to control the overall volume of your amp, also known as the "Wife Knob". Turn it down to ridiculously quiet levels while retaining concert tone and gain. (free w/ Mod/Re-works) - $125
Dual Output Level -	Footswitch between 2 Output Level Control knobs, only one is functional at a time. You set one louder. Great for a lead boost, and for staying loud when you turn your guitar's volume down for a clean sound. - $195 with other work. $205 by itself (subtract $20 if you have your own footswitch).